(1 x Brushless AC servo motor (550W /750W /1100W/1500W / 2200W ). Speed range (RPM): 200-7000 (550W); 200-6500 (750W); 200-6000 (1100W); 200-5000 (1500W)；200-4500 (2200W). Rated torque (Nm): 1.85 (550W); 2.62 (750W); 3.55 (1100W); 5.02 (1500W)); 6.85 (2200W).
Model:T10 AT10 / Pitch:10MM. Model:T5 AT5 / Pitch:_5MM. Material:White polyurethane with steel wire. Belt width:15/20/25/30MM. Belt width:20/25/30MM. Open-end belts are for open-end use and do not go to the ring.
Nachi Aqua Drill EX 9/16″ Coolant Thru Carbide Drill 9/16 L9623 (LOC1123D) SKU: SMT56797 Brand: Nachi Condition: New Material: Carbide MPN: 9/16 L9623 Cutting Diameter: 9/16 Shank Diameter: 15mm Flutes: 2 Coating: Aqua EX Coolant Through: Yes
1 x Digital Stepper Driver 1.0-4.5A 18-50VDC for Nema 17, 23, 24 Stepper Motor. 1 x Nema 23 Stepper Motor 2.4Nm(339.87oz.in) 4A 57x57x82mm 8mm Shaft 4 Wires. Suitable for 2-phase and 4-phase motors, works well as nema 17 driver, nema 23 driver.
Four (4) Orange & Black 6mm push-on knobs for potentiometers with D-Shaped shaft, 270-degree type. These knobs are high-quality replacement knobs, not original versions, and fit numerous Behringer Mixers, Soundcraft Mixers, and DJ-TECH equipment. Check dimensions below for compatibility. Dimensions:height: 15mmwidth (bottom): 12mmwidth (top): 9mmshaft size: 6mm, D-shapeTo be clear, these knobs are for D-shaped potentiometer shafts. These are 270-degree knobs, which refers to the position of the tabs in the knob’s hole, which determines where the pointer is pointing at 12:00. See the second photo/graphic that accompanies this listing for an illustration of what this means – it’s easier to explain with that graphic. The photos that accompany this listing show the actual knobs you will receive. They are high quality, something I focus on, and not widely available. These will ship the same day as you order. They should get to you very quickly – as my feedback reflects. Any questions, please ask. Thanks!
Material: 304 Stainless Steel. 1.2x10x100, Indicating That The Wire Thickness Of The Spring Is 1.2mm. And The Total Length Of The Spring Including The Circle Is 100mm.
15mm x 1mm Strong Round Magnets Rare Earth thin Magnets Specification:Dimensions: 15mm x 1mm thick Tolerances: ±0.2mm x ±0.2mm Plating/Coating: Ni-Cu-Ni (Nickel) Magnetization Direction: Axial (Poles on Flat Ends) Max Operating Temp: 176ºF (80ºC) Pull Force: approx. 0.6 lb Material Features: N52 grade Magnets are made of a brittle material. These magnets are not as strong as steel. They are more like a brittle ceramic. If you let two magnets slam together, they can crack and break. This is true for magnets large and small. WARNING!!! Strong magnets should Keep away from Ironware and some easily magnetized iron products, such as monitors, bank cards, computers, televisions, mobile phones and other. These magnets are very powerful which should be handled with great care. Without parents supervised do not allow children to playing magnets as they could get injured. Especially pay attention to the small magnets, please place in somewhere children can’t reach place.
Good color rendering effect, no dust. 2 1/4″ x 50′ Thermal Paper is a special fine paper that is impregnated (covered) with a chemical that changes color when exposed to heat. This protective layer protects the paper from the printer heat.
